Plural Character Type Variable (S) Reading / Writing Command - YASKAWA DX100 Instructions Manual

DX100

3.3.33 Plural Character Type Variable (S) Reading / Writing Command

Command No. 0x306
Instance Specify one out of followings
0 to 99 (for standard setting)
•
Attribute Fixed to "0"
Service 0x33 : Read plural data
0x34 : Write plural data
32bit integer Byte 0
1 Number
2 S variable 1
3
4
5
:
114 S variable 29
115
116
117
Status Respond by one in the followings
0x00 : respond normally
•
Other than 0x00
•
Added status size 0: no added status
•
1: 1 WORD
•
2: 2 WORD
•
Added status The error code specified by the
added status size
3 Transmission Procedure
3.3 Respective Commands for Robot Control
Request
Sub header part
<Details>
Specify the variable number (the first number with which
reading/writing is executed)
Follow the numbers of the variable specified by the
parameter since the extended variable is an optional
function.
Specify "0"
Only batch access of all elements is valid
Specify the accessing method to the data.
0x33: Read plural data
0x34: Write plural data
Data part
Byte 1 Byte 2 Byte3
Answer
Sub header part
<Details>
: respond abnormally
"1" indicates 1 WORD of added status data, and "2"
indicates 2 WORD of added status data.
The error code of 1 WORD exists if the added status
code is "1" and that of 2 WORD exists if the code is "2".
3-67
<Details>
Maximum: 29
Variable data part is valid only when writing.
Only the number of data is valid when
reading.
HW1480958
162529-1CD
86 of 119