FUEL INJECTION (FUEL SYSTEMS)
22.Fuel Cut Valve
A: REMOVAL
WARNING:
• Place "NO FIRE" signs near the working area.
• Be careful not to spill fuel on the floor.
• During work procedures, if fuel tank is more
than 3/4 full, be careful because fuel may spill.
1) Remove fuel tank. <Ref. to FU(SOHCw/oOBD)-
48, REMOVAL, Fuel Tank.>
2) Move clip and disconnect evaporation hose from
fuel cut valve.
3) Remove bolts which install fuel cut valve.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
4.4 N·m (0.45 kgf-m, 3.3 ft-lb)
FUEL CUT VALVE
S2M0176
S2M0177
FU(SOHCw/oOBD)-58