Tektronix 2212 User Manual page 132

Making Hardcopies
5-46
Output Port
The following ports can be selected in the menu:
Centronics output
RS232-C output (only with Option 12)
GPIB output (only with Option 10)
NOTE
If the RS-232-C or GPIB output is selected, the program-
mable communication interface is switched off.
Printer Drivers
The following printer drivers can be selected in the menu:
EPS_FX
EPS_LQ
HPGL
Deskjet
Thinkjet
Laserjet
NOTE
If HPGL is selected, the "size" line is changed to:
nr of pens:
1
1.
The HP-GL (Hewlett-Packard Graphics Language) driver
uses a small subset of the HP-GL command set.
The commands used are shown as follows:
Scale SC < scale x, scale y >
Select Pen SP < pen number >
Pen Up PU
Pen Down PD
Set Defaults DF
Move Absolute PA< absolute x,y location>
Set Character Size SR < character width, character height >
Plot Text String LB < text string > < ETX character >
Command arguments are shown in < > brackets.
The xy command arguments for the PA command are re-
stricted to the scale x and scale y limits defined by the scale
command.
Rev. 5/93 In Detail