Tektronix 2212 User Manual page 61

Non-Storage Examples
Step 5. Set the Cursors ON/Off switch to ON.
Step 6. Toggle the b.V1/b.V2/b.T/1/tff switch to the 1/b.T position.
Observe that two vertical cursors appear on the crt.
Step
7.
Position the cursors to the zero-crossing points of the
waveform using the Cursor POSITION control and the
TOGGGLE CURSOR switch (see Figure 3-6).
Step 8. You can read the frequency of the waveform from the crt
readout display.
2212 User Manual
3 -13