Power; Fuse Holder; Figure 5-9 Rear Panel (Partial) - Tektronix 2212 User Manual

Power
This section discusses the ac power connections to your 2212.
Fuse Holder
Power Cord Receptacle.
The 2212 can be operated from a ac power source in the 95-128 VAC
range, or in the 190-250 V AC range, as indicated on the Rear Panel.
"''
co
"
.. ..
.
:
.
:
..
.
:
.
:
~::::::::;;;;.,
~
SURING,TESTING
242
T iQUlPIIENT
::.::::::'" ®•
:.EPSRSOOIME'.LDElABOAArQI"-".
CAUTION
TO AVOID ELECTRIC SHOCK THE POWERCORD PROTECTIVE GROUNDING CONDUCTOR
MUST BE CONNECTED TO GROUND
FOR CONTINUED FIRE PROTECTION, REPLACE FUSE ONLY WITH 250V FUSE OF THE
SPECIFIED TYPE AND RATING.
NO OPERATOR SERVICEABLE COMPONENTS INSIDE. DO NOT REMOVE COVERS. REFER
SERVICING TO QUALIFIED PERSONNEL
DISCONNECT
(G)
"'"'"
CORD BF.FORE
REPLACING FUSE
@
VOLTAGE "
""'"
-
95-128 V
U0-250 V
48-U0Hz
0
ATTACH POWER-
CORD CLAMP
Figure 5-9 Rear Panel (Partial)
NOTE
If you want to change the ac power source rating, a qualified
service technician must be consulted to change the fuse and
the power setting inside the instrument.
2212
User Manual
5- 49