Cursor Functions; Ll Vl Cursor Function; Ll V2 Cursor Function; Ll V Cursor Function - Tektronix 2212 User Manual

Cursors
Li Vt, LiV2, LiV, LiVX, LiVY and RATIO
Cursor Functions
5 - 32
Ll Vl Cursor Function
With the cursor mode switch in the ~Vl mode, two horizontal
cursors are displayed on the screen. The vertical mode switch is
set to the CH1 position.
~
Vl is represented in the crt readout dis-
play by the distance between the two cursors and expressed in an
equivalent voltage.
The VOL TS/DIV scaling for this measurement mode is defined by:
- The setting of the CH 1 VOL TS/DIV switch.
- The probe encoding (1X, 10X, 100X).
Ll V2 Cursor Function
With the cursor mode switch in the ~V2 mode, two horizontal cur-
sors are displayed on the screen. The vertical mode switch is set to
the CH 2 position.
~
VZ is represented in the crt readout display by
the distance between the two cursors and expressed in an equiva-
lent voltage.
The VOL TS/DIV scaling for this measurement mode is defined by:
- The setting of the CH 2 VOL TS/DIV switch.
- The probe encoding (1X, 10X, 100X).
Ll V Cursor Function
The cursor type is displayed in the crt readout as
~
V when the
vertical MODE switch is in ADD position and both vertical
channels have the same deflection factor (VOL TS/DIV switch set-
ting).
~
V is represented in the crt readout display by the distance
between the two cursors and expressed in an equivalent voltage.
In Detail