Menu Types - Tektronix 2212 User Manual

Setup
5 - 44
Type Identification (Line 1)
The top menu line of every MENU page shows the instrument
type, the version of the main software (Vl.3 in Figure 5-8 on
page 5-45) and the version of the front panel software ( number
2 in Figure 5-8 on page 5-45).
Menu Type (Line 2)
On the second line of the MENU you can select one of the menu
pages that are available for your instrument configuration.
Parameter Selection
Parameters on a menu page can be selected by using the
CURSOR POSITION control and the TOGGLE CURSOR
switch, as described hereafter:
The CURSOR POSITION control is used for selection of
parameters on a horizontal menu line ( indicated by
"f-
•
<cursor position>"on the bottom line).
The selected parameters are displayed underlined.
When a parameter is changed, the underlining disap-
pears and the new setting will be indicated by a "["
opening bracket in front and a "]" closing bracket behind
the new setting. When you leave the menu, the new
parameter setting will be stored in the non-volatile
memory.
- The TOGGLE CURSOR switch is used for selecting a
menu line ( indicated by" J, <cursor toggle>"on the
bottom menu line). The selected menu line is indicated
by a ">" pointer in front of the menu line involved.
Parameter Positioning and Line Positioning (Line 9)
On menu line 9 is stated that you can select a parameter on a
menu line with the CURSOR POSITION control, and a menu
line with the TOGGLE CURSOR switch.
Exit <menu> and/or a-Z <trigger level> (Line 10)
On menu line 10 is stated that you can leave the MENU by
pressing the SAVE +RECALL buttons simultaneously, in the
Setup region of the front panel, and return to normal signal
display. If "user text" is on, "a-Z <trigger level>" states that
you can select characters with the Trigger LEVEL control on
the front panel.
In Detail