Print Screen (Prnscr) Function - Tektronix 2212 User Manual

Storage
5-40
®
Print Screen (PRNSCR) Function
When you press the RECALL and HOLD button simultane-
ously, a data dump to a selected output device is started.
(Only when the 2212 is in the Store mode).
NOTE
Neither the horizontal POSITION nor the horizontal
magnify switch (Xl, X10, X50) has any effect on the
horizontal position of the plot. The hardcopy output
represents the unmagnified
(Xl
horizontal magnifi-
cation) screen and the plotted SEC/DIV scaling re-
flects the unmagnified horizontal deflection factor.
Holding the RECALL and HOLD switches simultaneously
pushed-in for more than three seconds will result in
aborting the print/plot process when a plot is in progress.
The trigger point on a plot or printout is indicated by an X.
The cursors and crt readout are plotted as displayed on the
crt screen.
The MENU screen can not be plotted.
In Detail