Ch 1 Or X And Ch 2 Ory Input Connectors - Tektronix 2212 User Manual

Vertical
®
CHI OR X and CH 2 ORY Input Connectors
The CH 1 OR X and CH 2 ORY Input Connectors connect
signals to the inputs of the deflection systems.
Coding-ring contacts on the CH 1 and CH 2 input connectors
are used to automatically switch the scale factor in the crt
readout when a probe with probe coding, as shown in Table
5-1, is attached to an input connector.
In X-Y mode, the signal connected to the CH
1
OR X input
controls the horizontal deflection, and the signal connected
to the CH 2 ORY input controls the vertical deflection.
NOTE
We recommend that you use Tektronix Probes because the
identity pin will allow the 2212 to automatically display a
readout with corrected sensitivity.
2212 User Manual
5-13