Cursor Control Functions; Cursor On Switch; Figure 5-5: Cursor Controls - Tektronix 2212 User Manual

Cursors
Cursor Control Functions
5 - 30
See Figure 5-5 for location of items 36 through 39.
37
Figure 5-5: Cursor controls
®
Cursor ON Switch
Pressing the cursor ON switch activates the cursor measure-
ment mode, and two cursor lines appear on the crt screen.
For fi V1 and fi VZ the cursors are horizontal lines, and for
fiT and 1/fiT, the cursors are vertical lines. Pressing this
button again cancels the cursor measurement mode, extin-
guishing the cursors and the cursor measurement display.
When the cursor measurement mode is inactive, pressing
the cursor ON button enables the cursor measurement mode
to restore the previous cursors and the cursor measurement
display.
In Detail