SSANGYONG KYRON 2010.01 Manual page 92

3) Components
(1) Intake Manifold Assembly
The intake manifold assembly is built for the optimized mixture of the EGR gas in the intake
chamber when the compressed air in the turbocharger is sent to the intake port. The intake port
is composed of the dual port (tangential and helical port) which increases the swirl ratio in
mid/low operating range, improves acceleration/fuel consumption and decreases particle
materials. However, there are some differences in the form of the EGR valve and 4-cylinder
engine.
- The inlet port and coolant outlet port is integrated together. Therefore, be careful not to let
the residual coolant in the manifold enter the inlet port when removing the intake manifold.
Also, replace the gasket with a new one and tighten it to the specified torque
(25 ± 2.5 Nm).
04-7
2321-01
ENGINE INTAKE SYSTEM
undefined