SSANGYONG KYRON 2010.01 Manual page 818

13-48
4890-01
15. ABS CIRCUIT IN EACH OPERATION RANGE
1
▶ Hydraulic Pressure Circuit when ABS
is Not Operating
- The hydraulic pressure in the master
cylinder increases through the vacuum
booster and it is delivered to the wheel via
the normal open inlet valve. At this moment,
the normally- closed outlet valve is closed.
The speed of the wheel that hydraulic
pressure is delivered reduces gradually.
ESP
KYRON 2010.01
2
▶ No Hydraulic Pressure Circuit when
ABS is Operating
- As hydraulic pressure on each wheel
increases, the wheel tends to lock. In order
to prevent the wheel from locking, the
hydraulic valve modulator operates the inlet
valve control solenoid to close the inlet valve
and stop the hydraulic pressure increases.
At this moment, the outlet valve is closed.
This procedure helps the wheel to maintain
a stable hydraulic pressure.