SSANGYONG KYRON 2010.01 Manual page 489

Table of Contents

Advertisement

02-10
8410-02
(2) Turn signal lamp (hazard warning lamp operation)
-
When the hazard warning lamp switch is pressed for approx. 0.1 to 0.59 seconds, the hazard
warning lamp blinks 3 times at an interval of 0.35 seconds.
-
When the hazard warning lamp switch is pressed for approx. 0.6 seconds or longer, the
hazard warning lamp blinks 10 times at an interval of 0.35 seconds.
-
This function is only available when the ignition key is in the "ON" position.
-
If the ignition key is turned to the "OFF" position during this function is activated, this function
is immediately deactivated.
-
If the system receives signals for the turn signal lamp operation during this function is
-
activated, this function is immediately deactivated.
-
While the turn signal lamp signals are already inputted, pressing the hazard warning lamp
switch does not activate the hazard warning lamp function.
FUSE AND RELAY
KYRON 2010.01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents