SSANGYONG KYRON 2010.01 Manual page 939

0-6
0000-00
Function Check
5) Set in Trouble Diagnosis Step 5
In this step, check the conditions of temperature related sensors.
Slightly turn the TEMP switch in step 4 until "51" is displayed on the display window. When
pressing DEF switch ,
Slightly turn to right to set
in
trouble diagnosis step 5.
6) Set in Trouble Diagnosis Step 6
In this step, the temperature can be compensated within the range of -3°C
control process according to the temperature to air conditioner controller. The step 6 initiates
when slightly rotating the fan speed switch (other than TEMP switch) in step 5.
Compensates the
temperature by
turning TEMP
dial.
FATC
KYRON 2010.01
displayed temperature changes as shown below in turns.
Press
Ambient air
temperature
Min. temperature
Step 6
compensation value
Press
Interior air
temperature
temperature
to 3°C in the
Starts the trouble
diagnosis step 6
by
speed dial.
Max. temperature
compensation value
Press
Intake air
turning fan