SSANGYONG KYRON 2010.01 Manual page 853

1. Jacket
2. Jacket cover
3. Combustion air fan
4. Combustion chamber
5. Combustion chamber with flame tube
6. Heat exchanger
7. Controller
8. Seal (between combustion chamber and
combustion air fan)
9. O-ring
10. Glow plug with cable
11. Seal (between combustion chamber and
heat exchanger)
12. Upper bush for fuel pipe
13. Lower bush for fuel pipe
14. Flame sensor
15. Bush for flame sensor (graphite)
16. Control and overheating sensor with cable
17. O-ring
6810-15
18. Surface sensor with cable
19. Controller connector
- 14-pin connector (waterproof)
20. Pressure spring for surface sensor
21. Pressure spring for control and
overheating sensor
22. O-ring
23. Coolant hose (inlet)
24. Coolant hose (outlet)
25. Tooth ring (2x)
26. Cable harness cover
27. Rubber seal
28. O-ring
29. Screw (M4 x 55 TORX / 2x)
30. Screw (M4 x 16 TORX / 2x)
31. Screw (M4 x 12 TORX / 2x)
32. Screw (M4 x 16 TORX / 4x)
33. Screw (M4 x 44 TORX / 4x)
34. Controller cable harness
35. Insulation washer
AIR CONDITIONER
01-21
KYRON 2010.01