SSANGYONG KYRON 2010.01 Manual page 425

2) Compression Pressure Test
▶ Standard Service Data
- A9912 0012B (001 589 76 21 00) Compression Pressure Tester
Measuring Procedure
▶
- Warm the engine up to normal operating temperature.
- Remove the spark plugs using the spark plug wrench.
- Place the diagram sheet to compression pressure tester A9912 0012B (001 589 76 21
00).
- Connect the adaptor to compression pressure tester A9912 0012B (001 589 76 21 00)
and install it into the spark plug hole.
- Crank the engine approx. eight revolutions by using the start motor.
- Compare the measurements of compression pressure tester A9912 0012B (001 589 76
21 00) with the specifications.
- Measure the compression pressure of the other cylinders in the same way.
- If measured value is not within the specifications, perform the cylinder pressure leakage
test.
- Discharge the combustion residues in the cylinders before testing the compression
pressure.
- Apply the parking brake before cranking the engine.
01-11
1113-01
ENGINE ASSEMBLY
KYRON 2010.01