SSANGYONG KYRON 2010.01 Manual page 643

03-22
3650-01
▶ Solenoids
- There are in total 10 solenoids used to control the transmission. All solenoids are located in
the Valve Body.
-
Solenoids S1, S2, S3 & S4 are ON/OFF solenoids. They determine the static gear position of
the transmission by controlling the shift valves.
-
Solenoids S5, S6, S7 & S8 are Variable Bleeding Solenoids (VBS) which ramp pressure via
a current change during gear shifting. They direct pressure to the regulator valves and are
the primary means of controlling gear shift quality.
-
Solenoids S9 is also a variable bleeding solenoid. It controls Line Pressure.
-
Solenoid S10 is a variable bleeding solenoid as well and is used for controlling the
application of the Torque Converter lock-up clutch.
-
ON/OFF Solenoids:
-
S1 controls apply/release of the C1 Clutch.
-
S2 controls apply/release of the C2 Clutch
-
S3 controls apply/release of the C3 Clutch & B2 Band
-
S4 controls apply/release of the B1 Band
- VBS Solenoids are generally used for regulating and ramping pressure to different shift
elements (clutch/band) :
- S5 regulates pressure supplied to the C1 Clutch
-
S6 regulates pressure supplied to the C2 Clutch
-
S7 regulates pressure supplied to the C3 Clutch & B2 Band
-
S8 regulates pressure supplied to the B1 Band
▶ Gear States Summary
DSI M78 6-SPEED A/T
KYRON 2010.01