SSANGYONG KYRON 2010.01 Manual page 37

01-17
0000-00
Oil Filter & Oil Cooler PCV Oil Separator
Cylinder head cover (oil + gas)
Oil Oil
Blow-by gas
cooler filter
(air duct hose)
Inlet port
Oil
(oil gauge pipe)
The first separation will happen when blow-
by gas passes through baffle plates in
cylinder head cover. Then oil and gas will
be separated due to cyclone effect after
entering the oil separator inlet port.
Separated oil returns to oil pan via oil drain
port and the gas will be burnt again after
entering the combustion chamber through
air duct hose via PCV valve that
opens/closes due to pressure differences
between the intake side and crankcase.
ENGINE GENERAL
undefined