SSANGYONG KYRON 2010.01 Manual page 678

03-104
3110-00
2) Inhibitor Switch Assembly
The inhibitor switch assembly provides gear position data to the transmission control unit
(TCU), inhibits starter motor operation when the transmission gear select (TGS) lever is not in
the neutral or park position, and enables reverse light operation when the TGS lever is in the
reverse position. The inhibitor switch has an individual circuit for each of these functions, with
only the gear lever position circuit being connected directly to the TCU.
The TCU supplies a 5 V reference signal to the gear lever position circuit (inhibitor switch) and
measures the voltage drop in the circuit to determine the gear lever position. There is a different
resistance value for each position of the TGS lever.
▶ DTC Description
▶ Schematic
▶ Connector Details
DSI M78 6-SPEED A/T
KYRON 2010.01