SSANGYONG KYRON 2010.01 Manual page 809

▶ ESP unit circuit (when the pressure is maintained)
▶ ESP unit circuit (when the pressure is increased)
The Inlet valve and outlet valve will be
closed to maintain the pressure in the
hydraulic circuit applied at the wheels. By
closing the valves, the hydraulic pressure at
the wheels will not be lost or supplied any
more. During ESP operation, the separation
valve closes and only the shuttle valve at the
pump opens.
The shuttle valve and inlet valve will be open
and the separation valve and outlet valve
will be closed. Then, the pump is operated.
When ESP operates while the ABS is
operating, the pressure will be increased
continuously until just before the
corresponding wheel gets
locked.
13-39
4890-01
ESP
KYRON 2010.01