SSANGYONG KYRON 2010.01 Manual page 108

07-6
9210-05
3. FUNCTION DESCRIPTION OF COOLING SYSTEM
- Cylinder head coolant outlet port is integrated into intake manifold. (in front of cylinder #1)
Improved shape and gasket material to prevent coolant from leaking
·
- In OM 600 engine, coolant inflows through the heater line rear section (cylinder #4 and #5)
of cylinder head.
However, in D27DT engine, coolant inflows from cylinder block through oil cooler (refer to
coolant flows layout in previous page).
It prevents cooling efficiency from decreasing due to coolant separation between
·
cylinder #4 and #5.
- In OM 600 engine, the cooling fan is installed with water pump, however, in case of
D27DT engine, it is connected to water pump with an additional pulley.
COOLING SYSTEM
undefined
Cylinder
head
Intake
manifold
Coolant
outlet port