SSANGYONG KYRON 2010.01 Manual page 424

01-10
1113-01
▶ Black Light and Dye Method
A dye and light kit is available for finding leaks, Refer to the manufacturer's directions when
using the kit.
- Pour the specified amount of dye into the engine oil fill tube.
- Operate the vehicle normal operating conditions as directed in the kit.
- Direct the light toward the suspected area. The dyed fluid will appear as a yellow path
leading to the source.
▶ Repairing the Leak
Once the origin of the leak has been pinpointed and traced back to its source, the cause of the
leak must be determined in order for it to be repaired properly.
If a gasket is replaced, but the sealing flange is bent, the new gasket will not repair the leak.
The bent flange must be repaired also. Before attempting to repair a leak, check for the
following conditions and correct them as they may cause a leak.
▶ Gaskets
- The fluid level/pressure is too high.
- The crankcase ventilation system is malfunctioning.
- The seal bore is damaged (scratched, burred or nicked).
- The seal is damaged or worn.
- Improper installation is evident.
- There are cracks in the components.
- The shaft surface is scratched, nicked or damaged.
- A loose or worn bearing is causing excess seal wear.
ENGINE ASSEMBLY
KYRON 2010.01