SSANGYONG KYRON 2010.01 Manual page 409

CRUISE CONTROL SYSTEM
OVERVIEW AND OPERATION PROCESS
1. CRUISE CONTROL SWITCH
The purpose of the cruise control system is to automatically maintain a vehicle speed set by the
driver, without depressing the accelerator pedal. The cruise control switch is located under the
right side of the steering wheel, and when this switch is operating "AUTO CRUISE" lamp comes
on.
The minimum speed for setting the cruise control system is 36 km/h (22.37 mph). Pay constant
attention to the distance between the vehicles and the traffic conditions when using the cruise
control system.
The cruise control system is a supplementary system, which helps the driver to drive the
vehicle at a desired speed without using the accelerator pedal under the traffic condition
where the vehicle-to-vehicle distance meets the legal requirement.
10-3
8510-23
8510-23
CRUISE CONTROL SYSTEM
KYRON 2010.01