SSANGYONG KYRON 2010.01 Manual page 76

6) Draining the Water From Fuel Filter
1. Place the water container under the fuel
filter.
2. Turn the drain plug (2) to "A" direction to
drain the water.
3. Wait until a certain amount of fuel gets
out from the port, then turn the drain plug
to "B" direction to tighten it.
- Be careful not to be injured by
surrounding equipment
working procedures.
4. Press the priming pump until it becomes
rigid.
5. Start the engine and check the conditions.
- If the priming pump is not properly
operated, air may get into the fuel line. It
may cause starting problem or fuel
system problem. Make sure to perform
the job in step 4.
ENGINE FUEL SYSTEM
03-5
1881-01
during the
undefined