SSANGYONG KYRON 2010.01 Manual page 776

13-6
4890-01
4) NON-ABS EQUIPPED VEHICLE ? WITH ONE WHEEL SPEED
SENSOR
The wheel speed sensor is installed on the rear right wheel regardless of the ABS/ESP
installation.
This sensor is to signal the vehicle speed to the engine ECU, TCCU, transmission, and
instrument panel.
There is no separate unit to process the wheel speed sensor signal.
The wheel speed sensor is connected to the engine ECU (terminal 36), where its signal is
processed, and is connected to other related systems through CAN communication.
Location of the wheel speed sensor
(rear right wheel)
ESP
KYRON 2010.01
Location of the Sensor Connector
Connector Appearance
In vehicle without ABS
In vehicle with ABS/ESP