SSANGYONG KYRON 2010.01 Manual page 802

13-32
4890-01
5) Operation of HDC Indicator Controller
This table describes the coming-on and blinking mode of HDC indicator according to the HDC
switch operation (ON/OFF).
The HDC indicator on the instrument panel has two modes; green (function lamp) and red
(warning lamp). The HDC switch is a push & self return type switch ? when you press it once, it
starts to operate and when you press it again, it stops the operation.
Basically, the brake system's basic functions can work even when there are problems with
the HDC system.
As given in the table above, the HDC warning lamp comes on when:
· Initial ignition ON
· HDC system error occurs
· Brake system overheat
ESP
KYRON 2010.01