Overview And Operation Process; Overview - SSANGYONG KYRON 2010.01 Manual

11-4
3310-00

OVERVIEW AND OPERATION PROCESS

1. OVERVIEW

PROPELLER SHAFT
KYRON 2010.01
The propeller shaft transfers the power
through the transmission and transfer case
to the front/rear axle differential carrier (final
reduction gear). It is manufactured by a thin
rounded steel pipe to have the strong
resisting force against the torsion and
bending.
Both ends of propeller shaft are connected
to the spider and the center of propeller
shaft is connected
accommodate the changes of the height and
length. The rubber bushing that covers the
intermediate bearing keeps the balance of
rear propeller shaft and absorbs its vibration.
to the spline to