SSANGYONG KYRON 2010.01 Manual page 514

WIPER AND WASHER SYSTEM
GENERAL
1. WIPER AND WASHER SYSTEM OVERVIEW
The wiper and washer system are controlled by STICS according to driver's wiper switch
operation. And the detection of rain drops by rain sensor is transmitted to STICS as the signal
for wiper system control.
The characteristics of the wiper and washer system including basic functions of manual wiper
are as follows.
1) Wiper function coupled auto washer
Rear wiper/washer
operation location
When the front wiper switch is off and this switch is pressed, washer fluid will be sprayed and
the wiper will automatically operate 4 times. Then, the fluid wil be sprayed again and the wiper
will automatically operate 3 times.
2) Integrated auto light sensor in rain sensor unit
Rain sensor
emitter lens
Light receiving
area of auto
light sensor
The rain sensor unit is installed on a proper location to detect the rain drops and the illumination
intensity.
To control the system, the sensed values of rain sensor and auto light sensor are sent to pin
no. 63 in STICS unit.
7810-01
Auto washer operation
switch (press)
09-3
7810-01
WIPER
KYRON 2010.01