SSANGYONG KYRON 2010.01 Manual page 530

3) Rain Sensing Sensitivity Control
- The wiper relay (LO) is turned on and the wiper motor runs one cycle when the volume
sensitivity is increased (ex: from 0 to 1) (while the ignition key is in "ON" position, the wiper
switch is in "AUTO" position, and the wiper motor is in "Parked" position). However, the
wiper motor can be operated only when the rain sensor detects the "Rain Detected" signal.
- If the volume sensitivity is changed more than 2 stages within 2 seconds, the wiper motor
runs only one cycle.
4) Auto Light Control
- Only when the auto light switch is in "AUTO" position, control the tail lamp and headlamp by
communicating with the rain sensor (while the ignition key is in "ON" position).
10-7
8610-09
RAIN SENSOR
KYRON 2010.01