SSANGYONG KYRON 2010.01 Manual page 864

02-6
8810-03
Once an air bag deploys, its repair parts vary according to the deployment situation and
damage to the vehicle from collision. Needed repairs also slightly vary between the front air
bags and the curtain air bags. The following are the differences:
▶ Replacement parts when the front air bags deploy
- The air bag units and their connection wires (connectors included), the seat belt
pretensioners and their connection wires (connectors included), the entire front air bags,
and the instrument panel (IP).
▶ Replacement parts when a curtain air bag deploys
- The new curtain air bag for the deployed side, the air bag unit and its connection wires
(connectors included), the collision G sensor assembly for the curtain air bag, and the
trims and roof headlining for the broken parts.
- When an air bag deploys (curtain air bags and seat belt pretensioners included), the air
bag unit must be replaced. Please do not attempt to delete the failure code with SCAN-100
because some data about the deployment situation are stored in the unit.
- The air bag related components, especially the air bag unit, must be stored in a sealed
case to prevent any damage.
- Please do not connect a tester to any air bag connector or single item to measure the
supplied power or resistance. The detonator may explode due to a sudden extra power
supplied by the tester.
- Before removing or installing any air bag related components, disconnect the negative
battery cable.
AIR BAG
KYRON 2010.01