SSANGYONG KYRON 2010.01 Manual page 528

OVERVIEW AND OPERATION PROCESS
1. FUNCTIONS AND SPECIFICATIONS OF
RAIN SENSING WIPER
1) Power-up Reminder Wiper
- When turning off and on the auto INT switch, the system drives the wiper motor through
LOW relay regardless of communication with rain sensor.
- The wiper relay (LOW) is turned on and the wiper motor runs one cycle when changing the
wiper switch to "AUTO" position from any other positions (while the ignition key is in "ON"
position).
When the wiper switch is turned to "ON" position again from other positions, the system
Drives the wiper motor through LOW relay one cycle only when the rain sensor detects the
"Rain Detected" signal.
10-5
8610-09
RAIN SENSOR
KYRON 2010.01