SSANGYONG KYRON 2010.01 Manual page 292

3. FUNCTION DESCRIPTION OF COOLING SYSTEM
- Cylinder head coolant outlet port is integrated into intake manifold. (in front of cylinder #1)
Improved shape and gasket material to prevent coolant from leaking
·
D20DT
Cylinder
head
- In OM 600 engine, coolant inflows through the heater line rear section (cylinder #4 and #5)
of cylinder head.
However, in D27DT engine, coolant inflows from cylinder block through oil cooler (refer to
coolant flows layout in previous page).
· It prevents cooling efficiency from decreasing due to coolant separation between
cylinder #4 and #5.
- In OM 600 engine, the cooling fan is installed with water pump, however, in case of
D27DT engine, it is connected to water pump with an additional pulley.
D27DT
Intake
manifold
Cylinder
head
Coolant
outlet port
07-7
2112-01
Intake
manifold
Coolant
outlet port
ENGINE D20DT
undefined