Fig. 2-2: X-Stream Gp, (Terminals Version) - Terminals And Fuse Holders - Emerson Rosemount Xstream Series Instruction Manual

Instruction Manual
HASAxE-IM-HS
05/2006
6 5
1 Fuse holders
2 Power terminals
3 Signal terminals
Signal inputs / outputs
All signal lines need to be connected to screw
terminals located at the analyzer's rear panel.
Available signals:
Detailed pin assignment
Emerson Process Management GmbH & Co. OHG
2-2-1 X-STREAM GP, X-STREAM GPS
4 3
Fig. 2-2: X-STREAM GP, (terminals version) -
terminals and fuse holders (cover removed)
standard:
optional:
4-4 Installation, page 4-6.
2 1
4 Strain reliefs
5 Protective earth terminal (PE)
6 Edge protection (part of removed cover;
shown for demonstration only)
Analog signal outputs
Relay status signals
Modbus interface (RS232; RS 485)
Digital inputs/outputs
X-STREAM
Line
PE
Neutral
2-7