Emerson Rosemount Xstream Series Instruction Manual page 113

Instruction Manual
HASAxE-IM-HS
05/2006
Scrolling
Some menus have more than 4 items, so they
cannot be shown on one screen. Such menus
show a "scroll indicator" in the last line ( ) or
in the first line ( ), depending on the direction
the menu is continued.
Line 1
Line 2..
Line 3
Line 4
Menu continued downwards
Editing
An editing session allows changing a variable's
value. It is initiated by pressing the
The cursor is now placed over the last character
of the current value. Change the selected
character by using the
le is an enumerated type, the whole value
expression will change.
Select a specific character to be changed by
using the and keys.
The available choice of characters/numbers is
smart and depends on the cursor position:
It is not possible to select '-' or '.' for the last
character. Integer numbers cannot contain a '.'.
Component selection
A single channel analyzer has only one primary
measurement = channel = component, so
editing measurement related parameters is
always done for this channel.
A dual channel analyzer requires to select the
channel the measurement related parameters
are to be edited. In this case a selection menu
appears automatically when a choice is
Emerson Process Management GmbH & Co. OHG
5-3 Software
Line 1
Line 2..
Line 3
Line 4
Menu continued downwards
and upwards
key.
keys; if the variab-
The menu is scrolled to the following page by
moving the cursor to the line with the scroll
indicator and pressing the related UP or
DOWN key, or by pressing either the LEFT or
RIGHT button independently from where the
cursor is placed.
Line 1
Line 2..
Line 3
Line 4
Menu continuedupwards
The position for '.' within a floating point number
is almost free.
An editing session can be terminated by two
means:
key: The value is checked for consistency
(e.g. min/max). If it passes the test it is
stored and the line is displayed as
selected. If it does not pass the check,
the reason will be displayed in a special
pop-up menu.
key: All inputs & changes will be lost.
Return to line selection
required; otherwise it remains hidden i.e. a
single component instrument will never show
such a menu.
Select Component
Component:
(i)Back: Press
X-STREAM
CO2.1
5-7