The Status Leds; The Display - Emerson Rosemount Xstream Series Instruction Manual

X-STREAM
5-2-1

The Display

5-2-2

The Status LEDs

5-2
5-2 User Interface
The display is either a alphanumeric 4x20
character liquid cristal or vacuum fluorescence
display.
The information shown depends on the
currently selected menu.
These three status LEDs enable the user to see
the instrument' s status at a glance, even from
larger distances.
The status messages are conform to the
German NAMUR NE 44 recommendations.
If this red LED is on, the instrument status is
"FAILURE".
If this red LED is
• Flashing: Maintenance Request, function
check or out of specification.
Off: Measurement OK
•
The 3rd LED gives power information:
Illuminated (green): Power On
Dark: Power Off
Instruction Manual
Emerson Process Management GmbH & Co. OHG
HASAxE-IM-HS
05/2006