Information On The Nameplate Label; Fig. 2-7: Analyzer Nameplate Label (Example) - Emerson Rosemount Xstream Series Instruction Manual

Instruction Manual
HASAxE-IM-HS
05/2006
2-3

Information on the Nameplate Label

The analyzer nameplate label gives important
information about the instrument's confi-
guration, installed measuring principle(s),
sample gas(es), measuring range(s) and
shows the serial number, required when asking
for support or spare parts.
Model and installed measuring
principles (here: IR & UV)
Channel 1:
Gas and measuring range
(here: CO, 400 to 1000 ppm)
Note!
The operator may change the analog output
scaling within the stated measuring ranges
without affecting the specifications.
(Here for channel 1 a 20 mA output signal
may be assigned to concentration values
between 400 and 1000 ppm,
OUTPUT SIGNAL SCALING menu, page
5-35 ).
The measuring ranges are also shown in the
INFO - RANGES.. menu,
Emerson Process Management GmbH & Co. OHG
2-3 Specifications on the Nameplate Label

Fig. 2-7: Analyzer Nameplate Label (example)

ANALOG
page 5-57.
The nameplate label is located either on the
instruments left or right housing side or at the
inner side of the front door (field housing).
(here: SO
X-STREAM
Serial number
Channel 2:
Gas and measuring range
, 800 to 2000 ppm)
2
2-13