Advanced Calibration Menu - Emerson Rosemount Xstream Series Instruction Manual

X-STREAM

5-4-2-3 Advanced Calibration Menu

Control..
Adv. calibration..
CANCEL calibration!
ZeroAll!
SpanAll!
ZeroSpanAll!
Note!
For detailed descriptions of how to perform
calibrations chapter 7 Maintenance.
5-16
5-4 Menu System - Control Menu
Note!
This menu is available only if the parameter
"Valves" in the INSTALLED OPTIONS setup
menu is other than none
When this line is selected, pressing the
cancels the ongoing calibration procedure
without any changes
When this line is selected, pressing the
starts zero calibrations for all channels.
When this line is selected, pressing the
starts span calibrations for all channels.
When this line is selected, pressing the
starts zero and span calibrations for all channels.
Note!
This menu appears for dual channel as well
as for single channel instruments: In this case
nd rd
the 2 and 3 line act like the separate zero /
span calibration menus while the 4
allows to start zero and span calibration by
pressing just one key.
Emerson Process Management GmbH & Co. OHG
Instruction Manual
HASAxE-IM-HS
05/2006
key
key
key
key
th
line