X-STREAM
5-4-3-2-2 Interval Time Setup Menu
Setup..
Calibration..
Interval time..
Interval time
ZeroCal:
SpanCal:
Note!
For detailed descriptions of how to perform
calibrations
chapter 7 Maintenance.
5-28
5-4 Menu System - Calibration Setup Menu
2 h
10 h
Note!
This menu is available only if the parameter
"Valves" in the INSTALLED OPTIONS setup
menu is other than none
If system is setup accordingly access level 3
code must be entered to access this menu.
Enter the time between two zero calibrations
when in autocal mode.
Enter the time between two span calibrations
when in autocal mode.
Input range for both values: 0 .. 999 h
Emerson Process Management GmbH & Co. OHG
Instruction Manual
HASAxE-IM-HS
05/2006