Emerson Rosemount Xstream Series Instruction Manual page 5

Instruction Manual
HASAxE-IM-HS
04/2006
Operating and Maintaining this Apparatus
This instrument has left the factory in com-
pliance with all applicable safety regulations.
To maintain this operating condition, the user
must strictly follow the instructions and consider
the warnings in this manual or provided on the
instrument.
Before switching on the instrument, verify that
the electrical supply voltage matches the
instrument´s operating voltage as set in the
factory.
Any interruption in the instrument´s ground line,
whether inside or outside the instrument, or
removal or interruption of its ground line
connection, could result in hazardous operating
conditions. Intentionally interrupting the
instrument´s protective ground is strictly prohi-
bited.
Opening cover panels could expose voltage-
carrying components. Connectors may also be
under voltage. The instrument must be
disconnected from all electrical supplies before
attempting any calibrations, maintenance
operations, repairs
replacements requiring opening of the
instrument. Any calibrations, maintenance
operations, or repairs that need the instrument
to be opened while connected to electrical
supplies should be subject to qualified
technicians familiar with the hazards involved
only!
Use only fuses of the correct type and current
ratings as replacements. Using repaired fuses
and short circuiting of fuse holders is prohibited.
Emerson Process Management GmbH & Co. OHG
Safety Instructions
or component
Observe all applicable regulations when
operating the instrument from an auto-
transformer or variac.
Substances hazardous to health may emerge
from the instrument's exhaust.
Please pay attention to the safety of your
operation personnel. Protective measures
must be taken, if required.
X-STREAM
S-3