Alcatel-Lucent 7750 SR Manual page 573

Service specific commands continue to be available to display service specific information,
including status.
PERs6# show service sdp-using
===============================================================================
SDP Using
===============================================================================
SvcId
-------------------------------------------------------------------------------
100
-------------------------------------------------------------------------------
Number of SDPs : 1
===============================================================================
* indicates that the corresponding row element may have been truncated.
BGP AD will advertise the VPLS-ID in the extended community attribute, VSI-ID in the NLRI
and the local PE id in the BGP next hop. At the receiving PE, the VPLS-ID is compared against
locally provisioned information to determine whether the two PEs share a common VPLS. If it is
found that they do, the BGP information is used in the signaling phase (see
Configuration Example on page
7750 SR OS Services Guide
SdpId Type
17406:4294967295 BgpAd
574).
Virtual Private LAN Services
Far End Opr S* I.Label
1.1.1.134 Up
E.Label
131063 131067
BGP VPLS
Page 573