Bgp Vpls Configuration Procedure - Alcatel-Lucent 7750 SR Manual

•
•
•

BGP VPLS Configuration Procedure

BGP VPLS configuration requires the setup of the MPLS infrastructure and VPLS instance:
•
•
•
•
•
•
•
The provisioning of the BGP VPLS information is similar with the BGP AD for LDP VPLS
procedure:
•
•
•
•
The BGP VPLS parameters are provisioned at VPLS instance level, once for all SDPs,
automatically generating the SDP associations using a procedure similar with the auto-binding in
BGP-VPNs/BGP-AD: i.e.
•
•
•
Page 494
Supports IGMP/PIM snooping
Support for High Availability is provided
Ethernet Service OAM toolset is supported: IEEE 802.1ag, Y.1731.
→ Not supported OAM features: CPE Ping, MAC trace/ping/populate/purge.
Create LSPs
Create SDPs if manually provisioned ones are required
Create customer accounts
Create template QoS, filter, scheduler, and accounting policies
Create a VPLS service
Configure interfaces and SAPs
Create exclusive QoS and filter policies
Configure Route Distinguisher, Route Target
Configure pseudowire template to be used, eventually multiple mappings between import
RT and pseudowire template
The above information is re-used also by BGP-AD
Configure the local VE-ID
The MP-BGP Next Hop value is used to determine the Far End (FE) information
The FE value is used to see if any SDP already exist to the remote PE
If none exist, the equivalent SDP must be instantiated:
→ FE value is used to find any existing LSP to remote PE
→ SDP and pseudowire parameters from the related pseudowire template are used
7750 SR OS Services Guide