Alcatel-Lucent 7750 SR Manual page 682

Virtual Private LAN Services
mc-endpoint
Syntax mc-endpoint mc-ep-id
mc-endpoint
Context config>service>vpls>endpoint
Description This command specifies the identifier associated with the multi-chassis endpoint. This value should
be the same on both MC-EP peers for the pseudowires that must be part of the same group.
The no form of this command removes the endpoint from the MC-EP. Single chassis behavior
applies.
Default
no mc-endpoint
Parameters mc-ep-id — Specifies a multi-chassis endpoint ID.
mc-ep-peer
Syntax mc-ep-peer name
mc-ep-peer ip-address
no mc-ep-peer
Context config>service>vpls>endpoint>mc-ep
Description
This command adds multi-chassis endpoint object.
The no form of this command removes the MC-Endpoint object.
Default mc-endpoint is not provisioned.
Parameters
name — Specifies the name of the multi-chassis end-point peer.
ip-address — Specifies the IP address of multi-chassis end-point peer.
msap-defaults
Syntax msap-defaults
Context config>service>vpls>sap
Description
This command configures the msap-defaults.
Page 682
Values 1 — 511999
Chassis-mode C limit: 196607
Chassis-mode D limit: 511999
Values 1 — 4294967295
7750 SR OS Services Guide