Alcatel-Lucent 7750 SR Manual page 621

VPLS Service Configuration Commands
Generic Commands
shutdown
Syntax [no] shutdown
Context config>service>vpls
config>service>vpls>snooping
config>service>vpls>igmp-trk
config>service>vpls>mac-move
config>service>vpls>gsmp
config>service>vpls>gsmp>group
config>service>vpls>gsmp>group>neighbor
config>service>vpls>interface
config>service>vpls>split-horizon-group
config>service>vpls>sap
config>service>vpls>sap>stp
config>service>vpls>sap>arp-host
config>service>vpls>sap>sub-sla-mgmt
config>service>vpls>mesh-sdp
config>service>vpls>spoke-sdp
config>service>vpls>spoke-sdp>stp
config>service>vpls>stp
config>service>vpls>spoke-sdp>stp
config>service>vpls>mrp
config>service>vpls>sap>dhcp>proxy
config>service>vpls>radius-discovery
config>service>vpls>mesh-sdp>dot1ag>mep
config>service>vpls>sap>eth-cfm>mep
config>service>vpls>>spoke-sdp>eth-cfm>mep
config>service>vpls>bgp-ad
config>service>vpls>eth-cfm>mep
config>service>vpls>mesh-sdp>eth-cfm>mep
config>service>vpls>>spoke-sdp>eth-cfm>mep
Description
This command administratively disables an entity. When disabled, an entity does not change, reset, or
remove any configuration settings or statistics.
The operational state of the entity is disabled as well as the operational state of any entities contained
within. Many objects must be shut down before they may be deleted.
Services are created in the administratively down (shutdown) state. When a no shutdown command
is entered, the service becomes administratively up and then tries to enter the operationally up state.
Default administrative states for services and service entities is described below in Special Cases.
The no form of this command places the entity into an administratively enabled state.
7750 SR OS Services Guide
Virtual Private LAN Services
Page 621