Alcatel-Lucent 7750 SR Manual page 706

Os services guide

Hide thumbs Also See for 7750 SR:

Table of Contents

Virtual Private LAN Services

no scheduler-policy

config>service>vpls>sap>ingress

config>service>vpls>sap>egress

This command applies an existing scheduler policy to an ingress or egress scheduler used by SAP

queues associated with this multi-service customer site. The schedulers defined in the scheduler

policy can only be created once the customer site has been appropriately assigned to a chassis port,

channel or slot. Scheduler policies are defined in the config>qos>scheduler-policy scheduler-policy-

name context.

The no form of this command removes the configured ingress or egress scheduler policy from the

multi-service customer site. When the policy is removed, the schedulers created due to the policy are

removed also making them unavailable for the ingress SAP queues associated with the customer site.

Queues that lose their parent scheduler association are deemed to be orphaned and are no longer

subject to a virtual scheduler. The SAPs that have ingress queues reliant on the removed schedulers

enter into an operational state depicting the orphaned status of one or more queues. When the no

scheduler-policy command is executed, the customer site ingress or egress node will not contain an

applied scheduler policy.

scheduler-policy-name: — The scheduler-policy-name parameter applies an existing scheduler policy

vlan-translation

vlan-translation {vlan-id | copy-outer}

no vlan-translation

cconfig>service>vpls>sap>ingress

This command configures ingress VLAN translation. If enabled with an explicit VLAN value, the

preserved VLAN ID will be overwritten with this value. This setting is applicable to Dot1q-

encapsulated ports. If enabled with the copy-outer keyword, the outer VLAN ID will be copied to the

inner position on QinQ-encapsulated ports. The feature is not supported on default-dot1q SAPs (1/1/

1:* and 1/1/1:0), as well as on TopQ SAPs.

The no form of this command sets the default value, and no action will be taken.

per default the preserved VLAN values will not be overwritten

vlan-id — Specifies the to use the VLAN ID of the SAP.

copy-outer — Specifies that the outer VLAN ID will be copied to the inner position on QinQ-

that was created in the config>qos>scheduler-policy scheduler-policy-name context to create

the hierarchy of ingress or egress virtual schedulers. The scheduler names defined within the

policy are created and made available to any ingress or egress queues created on associated

Any existing valid scheduler policy name.

encapsulated ports

7750 SR OS Services Guide