Figure 91: Bgp-Ad Cli Command Tree - Alcatel-Lucent 7750 SR Manual

values. The VSI-ID value is generated from the MPLS router-ID. All of these parameters are
configurable and can be coded to suit requirements and build different topologies.
PE134>config>service>vpls>bgp-ad#
[no] pw-template-bi* - Configure pw-template bind policy
[no] route-target
[no] shutdown
vpls-id
[no] vsi-export
vsi-id
[no] vsi-import
A helpful command displays the service information, the BGP parameters and the SDP bindings in
use. When the discovery process is completed successfully each endpoint will have an entry for
the service.
PE134># show service l2-route-table
=======================================================================
Services: L2 Route Information - Summary Service
=======================================================================
Svc Id
-----------------------------------------------------------------------
100
-----------------------------------------------------------------------
No. of L2 Route Entries: 1
=======================================================================
PERs6>#
PERs6># show service l2-route-table
=======================================================================
Services: L2 Route Information - Summary Service
=======================================================================
Svc Id
-----------------------------------------------------------------------
100
-----------------------------------------------------------------------
No. of L2 Route Entries: 1
=======================================================================
PERs6>#
When only one of the endpoints has an entry for the service in the l2-routing-table, it is most likely
a problem with the RT values used for import and export. This would most likely happen when
different import and export RT values are configured using a router policy or the route-target
command.
Page 572
- Configure route target
- Administratively enable/disable BGP auto-discovery
- Configure VPLS-ID
- VSI export route policies
+ Configure VSI-id
- VSI import route policies

Figure 91: BGP-AD CLI Command Tree

L2-Routes (RD-Prefix)
Sdp Bind Id
65535:100-1.1.1.6
17406:4294967295
L2-Routes (RD-Prefix)
Sdp Bind Id
65535:100-1.1.1.134
17406:4294967295
Next Hop Origin
1.1.1.6 BGP-L2
Next Hop Origin
1.1.1.134 BGP-L2
7750 SR OS Services Guide