Alcatel-Lucent 7750 SR Manual page 675

mep
Syntax mep mep-id domain md-index association ma-index [direction {up | down}]
no mep mep-id domain md-index association ma-index
Context config>service>vpls>mesh-sdp
config>service>vpls>spoke-sdp>eth-cfm
config>service>vpls>eth-cfm
config>service>vpls>sap>eth-cfm
Description
This command configures a SAP ETH-CFM maintenance endpoint (MEP).
Parameters mep-id — Specifies the maintenance association end point identifier.
md-index — Specifies the maintenance domain (MD) index value.
ma-index — Specifies the MA index value.
direction up| down — Indicates the direction in which the maintenance association (MEP or MIP)
mip
Syntax [no] mip
Context config>service>vpls>eth-cfm
config>service>vpls>sap>eth-cfm
config>service>vpls>spoke-sdp>eth-cfm
Description This command allows Maintenance Intermediate Points (MIPs) to be created if mhf-creation for the
MA is set to default.
The no form of the command disables the MIP creation.
ais-enable
Syntax [no] ais-enable
Context config>service>vpls>sap>eth-cfm>mep
config>service>vpls>mesh-sdp>eth-cfm>mep
config>service>vpls>spoke-sdp>eth-cfm>mep
Description This command enables the generation and the reception of AIS messages.
7750 SR OS Services Guide
Values
1 — 8191
Values 1 — 4294967295
Values
1 — 4294967295
faces on the bridge port.
down — Sends continuity check messages away from the MAC relay entity.
up — Sends continuity check messages towards the MAC relay entity.
Virtual Private LAN Services
Page 675