Alcatel-Lucent 7750 SR Manual page 692

Virtual Private LAN Services
hsmda-queue-override
Syntax [no] hsmda-queue-override
Context config>service>vpls>sap>egress
config>service>vpls>sap>igress
Description This command enables the context to configure HSMDA queue overrides.
queue
Syntax queue queue-id [create]
no queue queue-id
Context config>service>vpls>sap>egress>hsmda-queue-override
config>service>vpls>sap>ingress>hsmda-queue-overider
Description This command configures overrides for a HSMDA queue. The actual valid values are those defined in
the given SAP QoS policy.
Parameters
queue-id — Specifies the queue ID to override.
create — This keyword is mandatory while creating a new queue override.
packet-byte-offset
Syntax packet-byte-offset {add add-bytes | subtract sub-bytes}
no packet-byte-offset
Context config>service>vpls>sap>egress>hsmda-queue-over
config>service>vpls>sap>ingress>hsmda-queue-over
Description
This command adds or subtracts the specified number of bytes to the accounting function for each
packet handled by the HSMDA queue. Normally, the accounting and leaky bucket functions are based
on the Ethernet DLC header, payload and the 4 byte CRC (everything except the preamble and inter-
frame gap). As an example, the packet-byte-offset command can be used to add the frame encapsula-
tion overhead (20 bytes) to the queues accounting functions.
The accounting functions affected include:
Page 692
Values 1 — 8
• Offered High Priority / In-Profile Octet Counter
• Offered Low Priority / Out-of-Profile Octet Counter
• Discarded High Priority / In-Profile Octet Counter
• Discarded Low Priority / Out-of-Profile Octet Counter
• Forwarded In-Profile Octet Counter
• Forwarded Out-of-Profile Octet Counter
• Peak Information Rate (PIR) Leaky Bucket Updates
7750 SR OS Services Guide