Modular Safety System Es Settings - "General" Tab; Settings Of Modular Safety System Es - "Download Settings" Tab - Siemens Sirius 3RK3 System Manual

● Show startup wizard
If you activate this checkbox, a startup wizard opens when you start MSS ES. With the
help of this startup wizard, you can:
– Create a new project
– Open an existing project
– Open a project online with an existing connection to the safety relay
6.4.5.2

Modular Safety System ES settings - "General" tab

Using the "Options" > "Settings of Modular Safety System ES" menu command, you can set
the desired behavior of the MSS ES.
"General settings" tab
It contains the following settings:
● Display object properties automatically on insert:
If you select "Display object properties automatically on insert", then a dialog box for the
properties of the respective object (in which you can set the parameters) immediately
appears after inserting a module in the HW configuration tables or after inserting a
function in the logic diagram.
● Show consistency check messages when saving.
● Cyclic data updates in online dialogs every ... seconds:
The data sets required for open online dialog boxes are read from the safety relay in this
time interval.
6.4.5.3

Settings of Modular Safety System ES - "Download settings" tab

Using the "Options" > "Settings of Modular Safety System ES" menu command, you can set
the desired behavior of the MSS ES.
"Download settings" tab
In the "Download settings" tab, you can define which parts of the system documentation are
to be loaded to the safety relay when the configuration is downloaded:
● Equipment identifier
● Element name
● Terminal identifier
Save memory space
You do not have to load the system documentation to the safety relay because the system
documentation is not evaluated by the safety relay and is therefore not needed for the safety
relay to function.
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
Description of the software
6.4 Description of the menu commands
121