Password For Test Mode; Compare With File; Compare With Switching Device - Siemens Sirius 3RK3 System Manual

Password prompt
This password prompt appears in the "Enter password" dialog box when you open a
password-protected device access or when you open an online configuration.
Note
If you have forgotten the password for device access, you must restore the factory settings
of the MSS. You must do this on the safety relay because commands in MSS ES are
password-protected.
6.4.2.22

Password for test mode...

With the "Edit" > "Password for test mode" menu command you can assign and change a
password for switching to test mode.
Password prompt
This password is prompted when you switch to test mode via the "Target system" > "Test
mode" menu command.
Note
If you have forgotten the password for changing to test mode, you must restore the factory
settings of the MSS. You can do this on the safety relay or by means of a command in the
MSS ES.
6.4.2.23

Compare with file...

The "Edit" > "Compare with file" menu command compares the parameters in the current
configuration with the parameters of a file that you select.
Result: the system lists any differences.
6.4.2.24

Compare with switching device...

The "Edit" > "Compare with switching device" menu command compares the parameters in
the current configuration with the parameters of a safety relay opened online that you select.
Result: the system lists any differences.
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
Description of the software
6.4 Description of the menu commands
111