Siemens Sirius 3RK3 System Manual page 208

Description of the software
6.7 Functions
Parameter name
Parameters - Output
circuit
See also
Messages for output functions (Page 268)
206
Q1
Q2
Auxiliary outputs
AUX1
AUX2
FAULT
Description/parameter value
Select the output for the processed signal.
Q1 can only be interconnected with the output of a safe module.
Only available with output type "Redundant F output":
Select the output for the processed signal.
Q2 can only be interconnected with the output of a safe module.
Select whether auxiliary outputs are to be activated:
No
•
One auxiliary output
•
Two auxiliary outputs
•
Select the output to be processed by the function.
Only available when two auxiliary outputs are activated:
Select the output for the processed signal.
Select the output for the processed signal.
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02